A brief explanation of the composition of my router

the effective cutting area is 54 in by 18 in by 5 in

three main pieces
1 the machine
2 the drivers
3 the computer

The Machine
Gantry,
Lead screws
Steppers
Transmission system
The Computer
OS Unbuntu/linux
Software EMC2
The Chips
Drivers
Wireing
Steppers
power supply

Diy cnc router. all 3 axis moving with explanation

So I did little bit of tuning on my motors and lead screws. and I got it to turn. My cnc is now operational!!! All it took was a bit of oil and some shim jims! Really though it turns out these machines need alot of tuning. I'm anxious to see how it does on its first cut. I may need the help of master Roshi(dad) to accomplish this.

My steppers wont turn

So I turned everything on and tried to test my axis' with emc2's stepconfig tool and the steppers wouldn't spin. im not sure what the issue is. the steppers turn when not hooked up to the machine frame. could the nuts on the end of the lead screw be to tight? could my amperage be to low? I double checked my wiring. I'm stumped. I need to sleep on this.

those pesky lead screws

I set up a lead screw system`and tried to jb weld the nut in place it poped loose.

proposed solution.....
Set plates on each side of the mount to lock the nut/s in place.